[TowerTalk] QST article on how to put up a tower

[Phil - KB9CRY]

Welding on rebar steel can weaken it unless done very correctly by a 
trained professional.  Tying is the preferred method; I believe there is 
no reduction in overall strength using ties.  Phil  KB9CRY

Paul Playford wrote:

>I am under the impression that the rebar cage should be tied, not welded.
>
>Comments?
>
>de Paul, W8AEF
>
>
>----- Original Message ----- 
>From: "David L. Thompson" <thompson at mindspring.com>
>To: <towertalk at contesting.com>
>Sent: Friday, June 20, 2003 1:04 AM
>Subject: Re: [TowerTalk] QST article on how to put up a tower
>
>
>  
>
>>The article was quite good except for pulling the tower up by a rope. It
>>looks like a US Tower and the easier way is to use the tower raising
>>fixture.  They sell one for the smaller towers and one for the HD towers.
>>    
>>
>I
>  
>
>>could not use my 71 footer without the fixture.
>>73 Dave K4JRB
>>
>>    
>>
>>>The July QST has an article by WB6WUW on how to put up a self-supporting
>>>tower.  It begins on p. 33.
>>>
>>>Rob Atkinson
>>>K5UJ
>>>      
>>>
>
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>  
>