[TowerTalk] Dressing coax on TIC Ring Rotors

[Mike Gilmer - N2MG]

Any suggestions on the best way to route the coax from 
the tower to an antenna mounted on a TIC ring?

Since, in my case, the TIC is mounted just above guy 
wires, I cannot drape the coax below the antenna to 
the tower.  The antenna has a boom truss support mast 
so I think that running the coax up the antenna's 
truss support and draping it over to the tower is the 
right way to go. (The anchor point on the tower will 
be at the same height as the top of the truss 
support).  Comments anyone?

Thanks,
Mike N2MG

________________________________________________
PeoplePC:  It's for people. And it's just smart. 
http://www.peoplepc.com