[TowerTalk] Homebrew CATV Hardline Connectors

[Scott Holisky]

Hi Mike -
               I found that a "coupler" brass compression fitting will fit the 1/2 line and a PL259 just fine. Local hardware store trip time :). Used this setup for quite a few years without issues.
--------
Greetings to all from the new guy waiting for his concrete to cure. Putting up a guyed 25G in the backyard to 50', per zoning reg's. Not too tall, but 10 years at the new house without flying a directional antenna is long enough!
 
73's Scott  N0AR
Nr.St.Paul, MN

	-----Original Message----- 
	From: Mike Rhodes [mailto:weightdn at adelphia.net] 
	
	

	I notice that in most of the threads regarding 1/2 and 3/4 inch CATV
	hardline the use of barrel connectors 

	Mike / W8DN