[TowerTalk] Using Belden 9913 on a crankup?

[coulter at bellsouth.net]

Could somebody tell me if Belden 9913(not 9913 flex)is usable on a crankup 
tower. What I am interested in, is if it is bendable enough when the tower is 
cranked down or will it bow out too much? Should I go to a more flexable cable 
for the run up the tower, or is it workable? This is for a 51 ft. crankup. 
Thanks for your help.

                            Todd
                            N4JRZ