[TowerTalk] EZ-way RBS-40 wind speed and load

[Alan C. Zack]

These are known as WIND CALCS and will need a wet stamp from a PE 
licensed in your state.  Before you spend your money for this check 
with your Bldg Dept and find out what specs they will accept.  Some 
will accept the older UBC-97 specs that U.S. Towers use, but others, 
like Nevada, require the newer IBC-2000 codes.
Good luck & 73

asciibaron at comcast.net wrote:

> i need documentation that details the wind speed and wind load information for the EZ-Way RBS-40 tower.  i can not get a building permit without this information.  my goal is to put an A3 on the tower along with a few wires for 40 and 80.
> 
> if anyone has this or knows of a source, please let me know.
> 
> -steve
> KB3KAQ

__________________________________________________________________________ 

Alan Zack
Amateur Radio Station K7ACZ
Las Vegas, Nevada, USA
Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
U.S. Coast Guard, Always Ready, Always There
Every hour, Every day, Around the Clock and Around the World
SEMPER PARATUS
http://gocoastguard.com