[TowerTalk] 7/16 DIN connectors

[Dubovsky, George]

Pete,

One word that I have never heard in the same sentence as "7/16 DIN" is
"inexpensive"! They _are_ available for all major cable sizes, but if I
had to deal with an existing one on the end of a cable (for amateur
service), I'd lop it off and re-terminate with N connectors. Much
cheaper in the long run.

73,

geo - n4ua

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Pete Smith
Sent: Monday, December 20, 2004 5:27 PM
To: towertalk at contesting.com
Subject: [TowerTalk] 7/16 DIN connectors

Has anyone had any experience using 7/16 DIN connectors on 1/2 inch
Andrew 
hardline (LD4-50A).  How about on RG-213 size coax?  I am trying to
figure 
out a relatively inexpensive way of mating the Andrew to RG-213 jumpers
at 
each end.

73, Pete N4ZR
The World HF Contest Station Database
was updated 13 December 2004
2843 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm  

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.  
If you have received it in error, please notify the sender
immediately and delete the original.  Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]