[TowerTalk] BN-86
Carl
cfwb at cox.net
Wed Feb 18 10:09:04 EST 2004
I think the BN4000 current balun is a good replacement for the BN86 if it's still made.
73,
Carl K8AV
> I haved done this on a TH6DXX just four years ago. Lets just say the BN86 will fail when using full output of an amplifier for
long periods of time. I have seen one burned up in my life. What I did was to put a RadioWorks 4 KW balun on my TH6DXX and works
just fine. I used a couple of hose clamps to attach it to the boom. IT has bee up four years and haven't any problems. The only
problem I have is the end caps get brittle and water gets into the traps. Have to replace them every 4-5 years.
> Bernard <wtrone at comcast.net> wrote:
> I am going to replace the BN-86 on my TH7 this Spring. I am wondering if anyone has bought a BN-86 since MFJ took over the
Hy-Gain operation? If so, what do you think of the quality of the balun?
>
> Anyone have any ideas for a "quality" balun to replace the BN-86.
>
> 73
>
> Bernard, WA4OEJ
More information about the TowerTalk
mailing list