[TowerTalk] Vertical Base Insulators

[Keith Dutson]

Try a long neck beer bottle standing on a 2X6 with shallow doorknob hole
drilled to hold bottle.  If this is too unstable or the weight breaks the
bottle, try a glass building block covered with a fiberglass roof shingle.

Keith WD5DXL

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Dan Levin
Sent: Friday, July 02, 2004 11:08 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Vertical Base Insulators

I'm planning to install a Channel Master  pushup mast (with stinger on top)
as a vertical antenna for 160 meters.  The mast is steel, and about 2.5" in
diameter at the base.  It will be guyed.  I have two questions:

 

1)       What is the conventional wisdom about insulating the base of such a
vertical from ground?  How far from ground does the bottom of the mast have
to be?  What materials are best to use as the insulator?  What materials
should I avoid?

2)       Does anyone have a specific proposal for a base insulator for such
an antenna?  I'm especially interested in anyone who is using such a mast as
a vertical, and has real experience with the mechanical and electrical
issues of all of this.

 

My current plan is to use a 1" piece of Delrin with a thin steel plate on
top of it (to spread the weight/pressure) as the base insulator.  What I
don't know is whether one inch is far enough from "ground".

 

Thanks!

 

                                    ***dan, K6IF

 

Don't forget the California QSO Party, coming up the first weekend of
October!

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk