[TowerTalk] Yaesu G-800 Indicator problem
Pete Smith
n4zr at contesting.com
Tue Mar 2 15:34:01 EST 2004
At 12:09 PM 3/2/04 -0800, Thomas Beltran wrote:
>Just finished work on my tower, and in the course of repairs, had to remove
>the rotator - Yaesu G-800SA. Before removing it, I turned my antenna North,
>and then unplug the control box. After everything was completed, I
>reinstalled the rotator, pointing my antenna North. It turns fine, but the
>indicator does not work - it is stuck North. I disassembled the plastic
>cover and took off the pointer, but could'nt find any problem. Has anyone
>had a similar problem? Is there a service manual available for this
>rotator?
This is the normal behavior on the A series controllers when one of the
indicator pot leads is open. The usual ohmmeter check should tell you
which one.
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
73, Pete N4ZR
Check out the World HF Contest Station Database
Updated 9 Jan 04
www.pvrc.org/wcsd/wcsdsearch.htm
More information about the TowerTalk
mailing list