[TowerTalk] Cross Bar Suggestion

w9ge finger at goeaston.net
Fri Nov 12 06:38:44 EST 2004


Dick:  Yes, a 2 by 2 piece of Oak 8 to 10 feet long, heavily varnished and 
guyed with non conductive rope or Phyllistran.  Keeps things non conductive 
and wires and feedpoints away from the tower.  73 bob de w9ge
----- Original Message ----- 
From: "Dick, WN3R" <WN3R at arrl.net>
To: <towertalk at contesting.com>
Sent: Wednesday, November 10, 2004 9:02 AM
Subject: [TowerTalk] Cross Bar Suggestion


>I need to know what kind and size of "pipe" to use as a cross piece near 
>the
> top of the tower.  Sailboat standard eye bolts, ropes, and blocks 
> (pulleys)
> will be installed near the ends to support wire antennas.  I would like 
> the
> safe working load to exceed 250 pounds.  I plan to use K0XG's boom to 
> tower
> plates.
>
>
>
> The tower legs are 2.5 feet across at the top.  I'd like to use an 8 foot
> length of "pipe".
>
>
>
> Any suggestions?
>
>
>
> 73,
>
>
>
> Dick, WN3R
>
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 



More information about the TowerTalk mailing list