[TowerTalk] Welding Aluminum Tower

[doc]

gdaught6 at stanford.edu wrote:
> Maybe not!  I know of a welding shop (in my locality... central 
> California) that will do welding jobs pretty cheaply.  I think they 
> have a minimum job cost of $30, and that's for 1/2 hour.  An 
> experienced welder can do a LOT of welding in 1/2 hour!  
> A bit of shopping for welders in your area may be worthwhile.
> 73, George T. Daughters, K6GT

Will take your advice and ask around.

Will also have a close look at the condition of the tower
overall, and ask the welder to do the same, my guess is that
a competent welder can observe points of stress.

-- 
Thanks! & 73, doc kd4e
West Central Florida  100% Linux.  Suse 9.2
Drake, Icom, Hallicrafters, Heathkit, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~