[TowerTalk] SWAP: 130'+ Rohn 25 for TiltOver or 55-60' Rohn 45 or 55

[doc]

Looking over the huge amount of post-occupancy work that is
ahead with our new house I simply will not have time to create
my custom Rohn 25 tiltover.

Full or partial swap (no cash) for a really solid complete
50+' tiltover or 55-60' of real clean Rohn 45 or 55 (must
include the loan of a gin pole, some installation help, and
hopefully a strong 15-20 foot mast).

The Rohn 45/55 would be installed without guys hosting a Force 12
C3SS, a multiband (6/2/440) vertical, and probably some sort of
VHF and/or UHF beam.

Here is what I have:

110 feet of Rohn 25 straight sections (mostly real clean, a few with
minor discoloration).

Rohn tiltover slab-mount base plate-hinge assembly.

Two taper-top Rohn 25 sections approx. 9' each (one is sound,
the other has a freeze breach in one leg but is otherwise OK)

Two rotor mount plates.

Two approx. 4' partial straight sections for setting in base.

Two side-mount arms.

Misc. additional hardware.

Located in Pasco County, Florida a little north of Tampa.

-- 
Thanks! & 73, doc kd4e

           |_|___|_|
           | | & | |
              {|
      /\      {|
     /  \     {|
    /    \    {|
   /   @  \   {|
   |   |~_|~~~~|
   |   -| |    |
============\ #    West Central Florida
     KD4E     ==============================
http://bibleseven.com/steelhouse1.html
Ham PC = 100% Linux Novell-Suse 9.2
Halli, Heathkit, Homebrew, MFJ, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~