[TowerTalk] FW: Stainless Steel U-Bolts for Rohn accessory shelves

[John Wagner]

-----Original Message-----
From: John Wagner [mailto:jwagner at dxengineering.com] 
Sent: Friday, August 05, 2005 1:14 PM
To: 'Fred Mott'
Subject: RE: [TowerTalk] Stainless Steel U-Bolts for Rohn accessory
shelves


Fred..Check out our V saddle clamps..they give you a bit more length.

http://www.dxengineering.com/Parts.asp?ID=215&PLID=167&SecID=1&DeptID=
21&PartNo=DXE%2DCAVS%2D1P

73, John W8JJW
DX Engineering

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Fred Mott
Sent: Friday, August 05, 2005 12:10 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Stainless Steel U-Bolts for Rohn accessory
shelves


I need to buy Stainless Steel U-Bolts for my Rohn AS45 shelves.  The
rail diameter is 1.25".  I have found many hits using google but I
haven't found the size I need.  DX Engineering has 1/4" - 1.25" SS
U-bolts saddle clamps, but the threading isn't deep enough according
to their U-bolt dimension page.  Any suggestions or help.  Fred AB8AH
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers",
"Wireless Weather Stations", and lot's more.  Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk