[TowerTalk] Anyone Familiar with Rohn 45 TiltOver?

[Bill Aycock]

I didn't know Rohn made a 45 Tiltover- I have seen the drawing for the 45 
Foldover, but not the Tiltover.
The max height for the Foldover is 68 ft, with half of that below the 
hinge, and half above.
Do you know the Rohn drawing no.?
Bill

At 10:04 PM 8/15/2005 -0400, doc wrote:

>I have a Rohn 45 TiltOver.
>
>The arm needs to be straightened and reinforced.
>
>I need to know about the cable, pulley, crank pieces.
>
>Anyone rebuilt one of these using readily available
>components who could share the specs, please?
>
>If it impacts component choices, as I anticipate that
>it does, I will only be tilting about 55 feet of tower
>plus a 20 foot mast (15 feet out the top) with a Force 12
>C3SS and a couple of other smaller beams or a beam and a
>VHF/UHF vertical.
>
>I would like to start locating and acquiring what I need
>a little at a time (as the budget allows).
>
>--
>Thanks! & 73, doc kd4e
>
>            |_|___|_|
>            | | & | |
>               {|
>       /\      {|
>      /  \     {|
>     /    \    {|
>    /   @  \   {|
>    |   |~_|~~~~|
>    |   -| |    |
>============\ #   http://bibleseven.com/kd4e.html
>      KD4E     =========================================
>West Central Florida
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

Bill Aycock - W4BSG
Woodville, Alabama