[TowerTalk] LMR- 600 Ultraflex

[Jim Smith]

I think what James is referring to may be found at
 http://www.tessco.com/products/displayProducts.do?groupId=576&subgroupId=25

HTH, Jim   VE7FO

JamesMNelson wrote:

>Bill,
>
> As I remember LMR600 is not much different than LMR400. If I remember
>correctly, the only big difference is that LMR600s dielectric is a little
>bit thicker; therefore the cable itself is a little bit larger. I have not
>had any problems working with it that I recall. It has been a couple of
>years so my memory is a little foggy. As I remember tessco sells a tool that
>makes the job a breeze. It is a little silver looking tube. There are blades
>on each end. One end takes off the urethane and the other cuts the shield,
>dielectric, and champs the center pin. Check them out a www.tessco.com. I
>hope that this is helpful and if I can help farther please let me know.
>
>
>Thanks,
> 
> 
>james//
> 
> 
>James M. Nelson
>KE4GWW
>ke4gww at arrl.net
> 
>
>
>  
>