[TowerTalk] Station Ground

[Richard Zalewski]

I will probably get beat up on this but what I have is a 6'x3"x1/4"
aluminum bar behind my operating position.  It is drilled and tapped
every 6".  Then at the end I have a 1/4 x 20 bolt that I attached my
large ground braid that goes about 5 feet to my ground rod system. 
Have not had problems with ground loops etc.

Dick W7ZR


On Fri, 14 Jan 2005 13:39:05 -0800 (PST), N6KJ <n6kj at yahoo.com> wrote:
> How do people attach their rigs to a bus-bar (or
> similar)?  The bigger the ground wire the better, but
> most rigs/amps have small, somewhat fragile grounding
> posts.  How do others out there connect a nice
> hefty ground wire to their rig or amp?  Also, how
> do people attach the wires to the bus-bar or
> ground rod?  Bolts?  U-Clamps?  Solder?  Any
> advice would be appreciated.
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - Helps protect you from nasty viruses.
> http://promotions.yahoo.com/new_mail
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


-- 
Tnx es 73
Dick W7ZR