[TowerTalk] Proper bolt sizes for Rohn 25G

[Dubovsky, George]

The rohn 25 tower section dwg sez: (3) each , 1/4" and 5/16", 1 1/2"
long, UNF thread. So, that's 1/4-28 and I can't remember what a fine
thread 5/16 is.

73,

geo - n4ua

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of chris
Sent: Wednesday, January 19, 2005 9:01 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Proper bolt sizes for Rohn 25G

I took down my tower a few years back and discarded the old, rusted 
bolts.  I cannot find a listing of the sizes for the bolts for the legs 
and the house bracket.  All the Rohn literature I have does not cover 
the fasteners by tower size.

I certainly would appreciate it, if someone could post the sizes for the

leg sections or point me to somewhere to find them.

Thanks,
-- 
Chris, K4AY

In theory, theory and practice are the same.  In practice, they are 
different.
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.  
If you have received it in error, please notify the sender
immediately and delete the original.  Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]