[TowerTalk] Proper bolt sizes for Rohn 25G

[Gary Schafer]

Note that the harder the grade the bolt is the quicker it will rust. 
That is why, if grade 5 is called for it should be galvanized.

73
Gary  K4FMX


Cqtestk4xs at aol.com wrote:
> Rohn bolts for 25 are fine threaded and are grade 5.  However, they usually 
> turn to rust in a short period of time.
> 
> My advice for guys putting up short tower (40-50) is to pick up galvanized 
> bolts at the local hardware store.
> 
> I'm no engineer, but the downward force of 200 lb. of tower and some guy 
> tension is not going to shear the bolts.  I've seen a fair amount collapsed tower 
> and have never seen any bolt shear.
> 
> Bill K4XS
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
>