[TowerTalk] TOWER GROUND

[Tom WA9WSJ]

Hi Mike,

I used a stainless steel U-bolts for my system. Check
out this link for the info and pictures.
http://www.wa9wsj.com/antenna_page.htm

You can bolt lugs to it or as I did, copper bars.
Simple, easy and works great!

Tom


--- MIKE GREENWAY <K4PI at peoplepc.com> wrote:

> I have read  here before on the reaction of putting
> copper to galvanized
> metal causes a bad reaction.  There were suggestions
> of putting stainless
> steel sheets between the galvanized leg and copper. 
> Are there any fixtures
> that bolt to galvanized legs that have little
> reaction and allow the copper
> ground wire to be connected to the fixture?  The
> ones I see in hardware
> stores are what appears to be brass and I have used
> them before and of
> course always using lots of No-Ox with precautions
> taken to prevent wash out
> of the No-Ox.  Any other suggestions better than the
> brass or stainless
> sheets?  Mike K4PI
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting
> Towers", "Wireless Weather Stations", and lot's
> more.  Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
>
http://lists.contesting.com/mailman/listinfo/towertalk
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com