[TowerTalk] tower

[Mirko Sibilja]

Sounds like a Wilson tubular tower.  I think that they are produced by UST
now, but am not sure...

Mirko, S57AD
----- Original Message -----
From: "tom talbot" <tom.talbot at bigpond.com>
To: <towertalk at contesting.com>
Sent: Tuesday, July 19, 2005 2:11 PM
Subject: [TowerTalk] tower


> Can any one help with the manufactures name of this tower so I can maybe
get a manual.It was imported to Australia about 20 years ago the owner is
now a silent key and I purchased it .I will describe it as best ,I can 'It
is a telescopic four section pipe withe the base section of about 8 inch the
top section is about 4 inch square. It has an electric motor winch u bolted
to the bottom section about  half way up .there is a large square section
bolted to a large block of concrete and the hole telescopic section is
winched up against this whith a hand winch. It sits on a bearing above a
rotator and the hole mast rotates in a gamble plate at the top of the fixed
square section, It has a single wire rope weaved up and Dow through pulles
on each section and will extended to about 70 feet right up 73 Tom VK6TH
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk