[TowerTalk] Rotator cable

[Matt Patterson]

http://thewireman.com/rotorp.html

He doesn't have stuff with the exact specs that you are wanting but  I bet 
that part # 304 or 305 would work.

73 Matt
W5LL
----- Original Message ----- 
From: "Alan NV8A (ex. AB2OS)" <nv8a at att.net>
To: "towertalk reflector" <towertalk at contesting.com>
Cc: "Phil Camera" <kb9cry at comcast.net>
Sent: Thursday, June 02, 2005 3:37 PM
Subject: Re: [TowerTalk] Rotator cable


> On 06/02/05 03:14 pm Phil Camera tossed the following ingredients into
> the ever-growing pot of cybersoup:
>
>> For my AlfaSpid installation, which is over 500 ft from the shack, I used 
>> the following.
>>
>>>From the controller in the shack to the lightning arrestor (ICE type) 
>>>just outside the window of the shack I ran regular multi conductor 
>>>rotator cable (#12 for the power and used the #14 for the positioner).
>
> <snip>
>
> What you are calling "regular multi conductor rotator cable (#12 for the
> power and used the #14 for the positioner)" is the kind of thing I was
> trying to find, but nobody seems to sell anything with #12 conductors
> and other thinner conductors.
>
> Where did you get this stuff? Who makes it? Our local electrical supply
> house is listed on the Belden Web site as one of their vendors but in
> fact no longer carries Belden products -- not that Belden makes rotator
> cable that heavy anyway, as far as I could see.
>
> Alan NV8A
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>