[TowerTalk] shunt-fed tower capacitor match location

[Richard W. Harris]

Hi,
I have my shunt-fed tower for 160M about ready to tune.  I have an Omega match (two vacuum variable capacitors) inside a pelican case with stepper motors to allow remote tuning.  I'm using insulated couplings to insure no electric coupling between the caps and the stepper motors.  My shunt wire is a wire a 10" triangular cage of 13 gauge wire spaced about 2 feet from the 72 foot crankup tower with the shunt-arm at the top of the tower.
 
My question is this:  My triangular shunt wire is spaced about 2 feet away from the tower.  Is there any problem with me putting the Pelican case with the matching capacitor network next to the tower and run the feed line from the box horizontally 2 feet to connect with the triangular cage?  Or, do I need to place the Pelican case directly under the triangular cage.  Just a question I have our of ignorance and I haven't been able to find anything in print suggesting the location of the matching network in relation to the tower and shunt wire.
 
Thanks much and 73,
Richard - KJ7CU