[TowerTalk] CQ article error(?)
Red
RedHaines at centurytel.net
Fri Oct 7 13:07:21 EDT 2005
I believe the single point ground is to hold all equipment grounds at a
common potential; so that there is no potential or voltage between any
two component grounds. Short and minimally inductive conductors from
equipment to that single point minimize that potential difference.
Equipment grounds and the single point ground must not be connected to
the system neutral, except at the service entrance and at the power
company equipment. There must be no path between system neutral and
ground anywhere else.
73 de Red, WOØW
Gary Schafer wrote:
>With single point grounding for the antenna / power system the idea is
>to not have ground paths through any equipment to ground.
>
>73
>Gary K4FMX
>
>
>
>
>
>
>
More information about the TowerTalk
mailing list