[TowerTalk] rohn tb25d torque bars

[K8RI on Tower talk]

----- Original Message ----- 
From: "Stephen Sala" <k7awb at msn.com>
To: <towertalk at contesting.com>
Sent: Thursday, October 13, 2005 5:14 PM
Subject: [TowerTalk] rohn tb25d torque bars


> My torque bars for Rohn 25 are up on the tower being used.  I need to know
> what is the diameter of the outward hole in which the guy wire connects 
> (or
> a thimble).  Does anyone have a spare that they can measure?  I cannot 
> find
> any diagram in the Rohn book for specifications.
>

If you have the ones that are a single arm the hole in the end is for a 
clevis pin, not the thimble.  The thimble fits through the clevis.
Don't forget to safety wire the clevis pin which screws in place.

I'll see if I have any photos I can put up.

The same is true of the tower rings someone asked about a week of so back.


Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com

> 73 and tnx
>
> Stephen L. Sala (Steve)
> K7AWB
> Retired on July 7, 2004
> Spokane Valley, WA  USA
> VP - Spokane DX Association
> Pacific NW VHF Society (#114)
> ARRL Life Member
> Grid DN17ip
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>