[TowerTalk] Ham IV Rotor

[el34guy@aol.com]

 Isnt the Ham 4 rated for 15sq ft mounted flatly on a plate inside a tower?
 
Mark
W0NCL
 
-----Original Message-----
From: Cqtestk4xs at aol.com
To: TOWERTALK at contesting.com
Sent: Fri, 21 Oct 2005 13:55:19 EDT
Subject: Re: [TowerTalk] Ham IV Rotor


Tim

Generally vertical weight is not the problem, especially if you use a thrust 
bearing.  By the time you would stress it by having too much weight, you would 
probably overload the ten square feet it is rated for as a wind load.

Bill K4XS
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk