[TowerTalk] Coax cutter

[Gary "Joe" Mayfield]

Tom,

     These have worked well for me.

http://www.hyperlinktech.com/web/cable_tools.php

73,
Joe
kk0sd


----- Original Message ----- 
From: "Tom Anderson" <WW5L at gte.net>
To: <towertalk at contesting.com>
Sent: Friday, September 02, 2005 6:19 PM
Subject: [TowerTalk] Coax cutter


> Fellow tower talkians:
>
> Anyone know of a good coax cutter/trimmer?  I've looked at the one at
> Radio Shack, but it just goes up to RG6 and RG 58, and doesn't list
> RG213 or RG8.
>
> I've also tried three different Fry's Electronics, but they never seem
> to have the right one in stock for RG8/RG213.  Theirs is always for RG58
> or RG6 tv or satellite TV coax.
>
> I've used a PVC pipe cutter for some time, but it doesn't seem to do the
> clean job that the standard coax trimmers do like leave the center
> conductor bare with a small amount of bare shield.
>
> Tom, WW5L
>
>
>
>
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>