[TowerTalk] Balun/Phasing question

[HFDXJUNKIE@aol.com]

Group, I have 2 - F12 606 I stacked and phased together @ 13 ft spacing, my  
question is, the B-1 balun I had (about 5 years old ) is about 12 in long and  
the new one I was sent was 6 inches long. I made the 12 inch  baluns cable  6 
inches shorter. Have I done this correct? I figured the total lenght of the  
phasing cables need to have the balun as part of the feed lenght too. So, 1  
cable with balun of 6 inches is 16 1/2 feet and the coax with the 12 inch balun 
 is 16 ft. Is that correct ? 
 
                                         Thanks for any replies, 
 
                                                Pete NA2P