[TowerTalk] Rohn 45 Base

[RICHARD BOYD]

It's something like 2-1/2 (or 3) by 2-1/2 (or 3) by 4' deep.  That's my recollection.

But you really should have the Rohn spec. book in front of you.  That's the authority on questions like this.

I think championradio.com has them available, as I've seen K7LXC (moderator of this reflector) mention before.

73 - Rich, KE3Q
  ----- Original Message ----- 
  From: JIM BARRON<mailto:WB5AAA at ALLTEL.NET> 
  To: towertalk at contesting.com<mailto:towertalk at contesting.com> 
  Sent: Tuesday, April 25, 2006 11:49 AM
  Subject: [TowerTalk] Rohn 45 Base


  Well Folks,

  How big do I need to dig the hole  for  a ROHN 45  going up about  80'?

  I plan on using a section of tower in the cement  then put 7 or 8 sections of tower on top of the base section

  thanks for any help

  73 for the shack of wb5aaa
  Jim Barron  
  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk at contesting.com<mailto:TowerTalk at contesting.com>
  http://lists.contesting.com/mailman/listinfo/towertalk<http://lists.contesting.com/mailman/listinfo/towertalk>