[TowerTalk] Rohn 45 Base

[W0MU Mike Fatchett]

I think you can find the info on the Rohn site as well.  Not sure what the
link is.

Mike W0MU 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of RICHARD BOYD
Sent: Tuesday, April 25, 2006 9:39 AM
To: towertalk at contesting.com; JIM BARRON
Subject: Re: [TowerTalk] Rohn 45 Base

It's something like 2-1/2 (or 3) by 2-1/2 (or 3) by 4' deep.  That's my
recollection.

But you really should have the Rohn spec. book in front of you.  That's the
authority on questions like this.

I think championradio.com has them available, as I've seen K7LXC (moderator
of this reflector) mention before.

73 - Rich, KE3Q
  ----- Original Message -----
  From: JIM BARRON<mailto:WB5AAA at ALLTEL.NET>
  To: towertalk at contesting.com<mailto:towertalk at contesting.com>
  Sent: Tuesday, April 25, 2006 11:49 AM
  Subject: [TowerTalk] Rohn 45 Base


  Well Folks,

  How big do I need to dig the hole  for  a ROHN 45  going up about  80'?

  I plan on using a section of tower in the cement  then put 7 or 8 sections
of tower on top of the base section

  thanks for any help

  73 for the shack of wb5aaa
  Jim Barron
  _______________________________________________



  _______________________________________________
  TowerTalk mailing list
  TowerTalk at contesting.com<mailto:TowerTalk at contesting.com>
 
http://lists.contesting.com/mailman/listinfo/towertalk<http://lists.contesti
ng.com/mailman/listinfo/towertalk>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk