[TowerTalk] Connectors for 3/4 in. CATV Hardline
JC Smith
jc-smith at comcast.net
Tue Aug 8 14:33:48 EDT 2006
Jim,
Did you build or buy the transformers (ununs?)?
Thanks & 73 - JC, K0HPS
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of James
Sent: Tuesday, August 08, 2006 10:38 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Connectors for 3/4 in. CATV Hardline
connectors for CATV line.
I have made several 2 meter and 440 transformers for use with CATV line.
Use copper tubing from a hobby supply store that has the ID of the OD of the
center conductor. round off the center conductor with a file and fish mouth
the tubing. use copper tubing ID same as OD of hardline to bridge the two
ends.
Using the same technique you can make a connector for SO239.
Cut the hardline outer layer back a few inches. With the center conductor
cleaned of the insulator, slip it into the center of the connector & solder.
Make a sleeve of copper or aluminum and hold it in place with a S S pipe
clamp. This connection will also need to be supported but you can do that
with tape against the tubing or whatever is close to the connection.
I use CATV cable to connect to 2 mtr and 440 antennas. Cheep and low loss.
With a 75 to 52 ohm transformer at each end it works out great.
JIM
KV4FE (N. FL)
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Norm Duxbury
Sent: Tuesday, August 08, 2006 12:54 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Connectors for 3/4 in. CATV Hardline
Does anyone know a source for connectors f/u/w 3/4 in. CATV hardline?
73, Norm, W1MO
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.7/409 - Release Date: 8/4/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.7/409 - Release Date: 8/4/2006
More information about the TowerTalk
mailing list