[TowerTalk] Was Hy-Gain HG-52SS, now HG50 MT2

[Chuck Chandler]

Thanks to Skip, KJ6Y, my tower has been identified as a HG50 MT2, not quite
the same tower.

Chuck and Frank, I'd still appreciate any info you can pass along as the two
are somewhat similar.  Looks like this one is meant to have the first
section guyed, which should reduce the base somewhat.  If I can't find any
details on the HG50 MT2 base I'm thinking of modifying the drawings for the
HG52-ss.

I'd actually prefer a small set of guys, the first section is only 20 feet
high so they would not be particularly large or difficult to place.

Chuck
==============================
73 de Chuck, WS1L
charles_chandler at comcast.net
==============================
----- Original Message ----- 
From: "Chuck Lewis" <clewis at knology.net>
To: "Chuck Chandler" <charles_chandler at comcast.net>
Sent: Sunday, February 19, 2006 10:19 PM
Subject: Re: [TowerTalk] Hy-Gain HG-52SS help needed


> OK. I'll get a chance to make copies either tomorrow or Tuesday, then I'll
> send via snailmail.
> Cl
>
> ----- Original Message ----- 
> From: "Chuck Chandler" <charles_chandler at comcast.net>
> To: "Chuck Lewis" <clewis at knology.net>
> Sent: Sunday, February 19, 2006 1:55 PM
> Subject: Re: [TowerTalk] Hy-Gain HG-52SS help needed
>
>
>> Hi, Chuck -
>>
>> Many thanks, I will take you up on your offer!
>>
>> Chuck Chandler
>> 14 Tarra Lane
>> Purvis, MS 39475-5825
>>
>> Thanks!
>> ==============================
>> 73 de Chuck, WS1L
>> charles_chandler at comcast.net
>> ==============================
>> ----- Original Message ----- 
>> From: "Chuck Lewis" <clewis at knology.net>
>> To: "Chuck Chandler" <charles_chandler at comcast.net>
>> Sent: Sunday, February 19, 2006 12:35 PM
>> Subject: Re: [TowerTalk] Hy-Gain HG-52SS help needed
>>
>>
>>> Chuck,
>>> I have the Hy-Gain stress document that provides some details. I can
>>> copy it for you and also include the drawing I made for my local welder.
>>> Worked fine for him and fit well on the base of the tower. Send your
>>> address and wait a week or so. It's a bigger document than you will want
>>> to receive as a fax or scan.
>>>
>>> 73, Chuck, N4NM
>>>
>>> ----- Original Message ----- 
>>> From: "Chuck Chandler" <charles_chandler at comcast.net>
>>> To: <towertalk at contesting.com>
>>> Sent: Sunday, February 19, 2006 8:59 AM
>>> Subject: [TowerTalk] Hy-Gain HG-52SS help needed
>>>
>>>
>>>> I've purchased a Hy-Gain HG-52SS crankup in good shape, with tilt-over
>>>> base but no steel cage foundation.  Does anon know of a source for
>>>> these or an alternative?  I plan on installing it free-standing and
>>>> have a blurry drawing that seems to give dimensions of 4x4x4 feet for
>>>> the base. Can someone confirm or correct that?
>>>>
>>>> Thanks in advance...
>>>> ==============================
>>>> 73 de Chuck, WS1L
>>>> charles_chandler at comcast.net
>>>> ==============================
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>