[TowerTalk] Rohn 25G

[ersmar@comcast.net]

Scott:

     The August 1996 issue of QST ran an article titled, "Install a House-Bracketed Tower--the Right Way!" by K1KP.  Tony describes the engineering work that went into his house-bracketed tower installation.  FWIW.

73 de
Gene Smar  AD3F


 -------------- Original message ----------------------
From: kb0fhp at comcast.net
> I have purchased several sections of Rohn 25G - 3 straight sections, and the 8' 
> top section with rotor plate. I want to attach this to the side of my two-story 
> house, at two locations (top header board, and the bottom board on the second 
> story).  This is about 10' and 20' up from grade.
> 
> What additional things do I need to purchase besides the 10' piece that goes in 
> the concrete; the house brackets; and a thrust bearing for the mast - what else 
> is required?
> 
> Antennas planned are Hy-Gain TH3-MkIII, CC 505S, CC 215 and a M2 432-9wl 
> antenna....
> 
> Thanks in advance for your suggestions.
> 
> Scott, KB0FHP
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk