[TowerTalk] Identifying A Rotator

[Larry WA9VRH]

Hi Larry,

It could be an AR-22R or an AR-22XL.  Do you have the control box for 
it?
I will in a following  email send you a pdf of the AR-22R.  If that is 
not the one I can scan the AR-22XL manual.

Hope this helps.

73 Larry WA9VRH


On Monday, July 3, 2006, at 03:58  PM, Larry Comden wrote:

> I have a rotator from the estate of an old friend and fellow pack-rat. 
> There are no identifying marks on the cast aluminum body BUT it 
> resembles the typical HyGain product. The bottom entry terminal strip 
> has only four terminals not the 5 or 8 I'd expect from a current 
> HyGain rotator.
>
> Terminal 2 shows no continuity to terminals 1, 3 and 4. There a low 
> ohms readings among the other three terminal.
>
> Can anyone help me identify this?
>
>
> TIA and 73
>
> Larry K3VX
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>