[TowerTalk] N-Connectors Needed

[Marlon K. Schafer (509) 982-2181]

You don't have to have a special tool to make the terminations on those 
cables.

But it would sure save you a LOT of time!

As far as I know that cable is still made.  Heliax is good stuff.

Marlon
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam



----- Original Message ----- 
From: "RCM" <robrk at nidhog.net>
To: "Alan NV8A" <nv8a at att.net>
Cc: "towertalk reflector" <towertalk at contesting.com>; "Lee Buller" 
<k0wa at swbell.net>
Sent: Saturday, June 10, 2006 4:13 PM
Subject: Re: [TowerTalk] N-Connectors Needed


> Alan NV8A wrote:
>> The connectors are available, but you might not like the price. Here is
>> one source:
>>
>> http://www.tessco.com/products/displayProductInfo.do?sku=451136&eventPage=1
>>
>> And I get the impression that a special tool is needed to install the
>> connectors.
>>
>> 73
>>
>> Alan NV8A
>>
>>
>> On 06/10/06 05:22 pm Lee Buller wrote:
>>
>>> Some of you have written me about the cable that I need connectors for. 
>>> Well, it is an odd ball type of coax....here is the link to RF Parts.
>>>
>>>   http://www.rfparts.com/heliax_LDF4550A.html
>>>
>>>   THe Newton Amateur Radio CLub is having trouble finding the 
>>> connectors...N type ... any gender.  It seems that this is coax that 
>>> might not be used much...or it is not being made anymore of something. 
>>> WE cot a 320 foot spool for free from a miss-order ... and I cannot 
>>> disclose the source of the benifactor.  It was easier to give it away 
>>> than go through the companies paperwork.  So, we accepted the gift and 
>>> now we have trouble finding connectors.  The plan is to put it on a new 
>>> county tower going up north of town and moving the local repeater to the 
>>> location.  Apparently, our tech guy has called around and cannot find 
>>> any connector.  We might have to make a connection ourselves...which is 
>>> not a bad thing but I would rather not.
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
> A special tool is needed to do a perfect job of cutting and stripping
> the coax. It can be done with hand tools. Don't ask me to do more than 
> two.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>