[TowerTalk] US Tower HDX-555

Ed Williams sunset392 at cox.net
Mon Apr 9 14:50:31 EDT 2007


My experience with my TX-489 is that when replacing the cables with any
pre-made ones, you need to remove the pulleys becuse the thimble ends  will
not pass through the pulleys openings.

73, de KN4KL ed

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of Bob Maser
Sent: Sunday, April 08, 2007 5:53 PM
To: Phil Snyder; towertalk at contesting.com
Subject: Re: [TowerTalk] US Tower HDX-555


Just pull the new cables in while pulling the old cables out.  You're lucky,
using pre made cable sets.  Try it when making up your own cables.

Bob  W6TR
----- Original Message -----
From: "Phil Snyder" <n9lah at comcast.net>
To: <towertalk at contesting.com>
Sent: Sunday, April 08, 2007 5:08 PM
Subject: [TowerTalk] US Tower HDX-555


> OK I have gotten the replacement cables from US Towers. Any tips from
> the folks who have done this project yet? The short cable for the upper
> section seems pretty straight forward. It is the routing of the cable
> through the motor drive that concerns me a little. I do plan on taking
> lots of pictures before and during the process. I also have access to
> two other units to check things out but both the closest is 30-40
> minutes away.
>
> Thanks
> Phil
> N9LAH
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/752 - Release Date: 4/8/2007 8:34
PM

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/752 - Release Date: 4/8/2007 8:34
PM



More information about the TowerTalk mailing list