[TowerTalk] Mast slipping

[Peter Voelpel]

Right, I looked for the wrong one.
But still half the allowed windload

73
Peter

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Greg
Sent: Samstag, 21. April 2007 21:19
To: Peter Voelpel; towertalk at contesting.com
Subject: Re: [TowerTalk] Mast slipping

The Optibeam OB12-6 has a windload of 16 sqft.k not 8.



-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of Peter Voelpel
Sent: Saturday, April 21, 2007 10:37 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Mast slipping


Why should they do so?
They claim  a wind area capacity of 35 sq. ft. For the Orion The Optibeam
just have 8 sq.ft.
Is that just a marketing figure?

73
Peter


-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of K7LXC at aol.com

>So it seems pinning this should be  fine. 


    I think they're going to discourage you from  pinning the mast, either
from a warranty viewpoint or potential damage from  it. OTOH it might work
just fine. 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk