[TowerTalk] What's best way to bypass rotor with ground strap?
K7LXC at aol.com
K7LXC at aol.com
Fri Aug 3 15:59:50 EDT 2007
In a message dated 8/1/2007 6:18:21 P.M. Pacific Daylight Time,
towertalk-request at contesting.com writes:
> What is the best way/location to bypass the rotor with a ground strap?
At the coax loop, at the rotor, elsewhere? What's the best way to do
it? Coil the braid around the mast or just let it hang out in a short
loop?
What is the function of the ground strap bypass? You've got electrical
continuity thru the rotator already so I'm not sure why you need an additional
strap.
BTW braid is not recommended for any grounding application. Eventually
each strand will oxidize and be non-conductive to the other strands. There'll
be continuity end-to-end but not strand-to-strand so you'll wind up with much
more resistance than you started with rendering your ground strap mostly
useless.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for hams
Cell: 206-890-4188
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
More information about the TowerTalk
mailing list