[TowerTalk] Tailtwister 2, Tashjian tower
Russell Hill
rustyhill at earthlink.net
Sun Aug 5 15:12:28 EDT 2007
To all who responded, many thanks!
Skip, I would love to see a picture, if it is convenient.
Again, thanks to all.
Rusty, na5tr
----- Original Message -----
From: KJ6Y at aol.com
To: rustyhill at earthlink.net ; towertalk at contesting.com
Sent: Sunday, August 05, 2007 10:58 AM
Subject: Re: [TowerTalk] Tailtwister 2, Tashjian tower
Rusty,
You can use the T2X in the LM-470, if that is the model you have. You'll need to use spacers to raise the plate up about 1 1/2" inches, to allow the rotor to clear the cross braces. Karl Tashjian can supply them or you can make your own out of a piece of angle iron. The tower will telescope all the way down with the rotor install.
If you need I can supply you a picture of the plate with the spacers.
Skip, KJ6Y
Communications Service Co
818-887-3569
------------------------------------------------------------------------------
Get a sneak peek of the all-new AOL.com.
More information about the TowerTalk
mailing list