[TowerTalk] Recommendation for heat gun for shrink wrap

[Mike, K6BR]

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96289

Sorry for extra mail, this was the one I was thinking of, but the $9.99 1kw
version will be all you need actually.

Mike K6BR

-----Original Message-----
From: Mike, K6BR [mailto:noddy1211 at sbcglobal.net] 
Sent: Thursday, August 23, 2007 3:49 PM
To: 'Mike, K6BR'; 'fraz1'; towertalk at contesting.com
Subject: RE: [TowerTalk] Recommendation for heat gun for shrink wrap
Importance: High

I guess I should have given you the link.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=35776


On sale for $9.99 right now, I have used the heck out of one for work to
melt hot glue, so that I can melt the 350 degree adhesive clean our hot glue
pumps and nozzles.

Mike K6BR

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Mike, K6BR
Sent: Thursday, August 23, 2007 3:33 PM
To: 'fraz1'; towertalk at contesting.com
Subject: Re: [TowerTalk] Recommendation for heat gun for shrink wrap

Good old Harbor Freight has 1500 watt unit for about 10 bucks, and it works
real well.

Mike 

-----Original Message-----


Hi folks.............any recommendation for a good heat gun to be used for
shrink wrapping would be appreciated.  Also, good known sources for shrink
wrap itself.

73 John K4NP
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk