[TowerTalk] Soldering RG213 to PL259
Ian White GM3SEK
gm3sek at ifwtech.co.uk
Tue Feb 6 03:00:44 EST 2007
Gary Schafer wrote:
>On the nickel plated ones take a file and remove the plating where you
>are going to solder. The brass under it tines quite easily.
>
Don't stop when the nickel is removed, but continue filing across the
hole until the brass comes down to a thin edge. This makes it much
easier to solder.
--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
More information about the TowerTalk
mailing list