[TowerTalk] Hy-Gain Balums or Coaxial Coil?

Chet Moore ChetMoore at cox.net
Mon Feb 26 21:07:04 EST 2007


If you are running 1.5 KW, Keep in mind that the older BN-86's were only 
rated for 1KW PEP

73

Chet  N4FX
----- Original Message ----- 
From: "KC4HW" <jimjohnson at alaweb.com>
To: <towertalk at contesting.com>
Sent: Monday, February 26, 2007 8:11 PM
Subject: [TowerTalk] Hy-Gain Balums or Coaxial Coil?


>I have been renovating a set of Hy-Gain monobanders.  These had the Hy-Gain 
>balum with
> them.
>
> I have opened one of the balums and beside a little oxidation at the SO239 
> they appears to
> be in pretty good condition.  I notice that there appeared to be a rubber 
> o ring at both ends
> of the ferrite material that has sort of gone away.  I don't know if that 
> is a big deal..
>
> Anyway, what to do... use the balums or coil coax, anybody got any 
> suggestions?
>
> Thanks
>
> Jim/KC4HW
> http://www.AlabamaContestGroup.org
> http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 




More information about the TowerTalk mailing list