[TowerTalk] Rotor Selection Advice Wanted - Heavy Duty

[Scott Honaker]

I'm getting ready to order a new mast clamp for my Orion 2800.  Is there
another version I should look for?

Scott N7SS

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of K7LXC at aol.com
Sent: Tuesday, January 09, 2007 6:15 AM
To: richard at karlquist.com; towertalk at contesting.com; donovanf at starpower.net
Subject: Re: [TowerTalk] Rotor Selection Advice Wanted - Heavy Duty


 
In a message dated 1/8/2007 8:56:34 P.M. Pacific Standard Time,  
richard at karlquist.com writes:

>  Now I'm confused again.  Is the problem with the  Orion
that the mast clamp slips, or the rotor breaks?  I  purchased
a heavy duty Slipp-Nott for my Orion to fix the mast  clamp slipping
problem.  I thought that would allow me to use the  Orion with the MonstIR.
 
    I haven't personally run across a broken Orion  although I'm sure there 
have been some. The culprit in my experience has been  the mast clamp. If
you 
can get it to hold the mast, you should be good to  go.
 
Cheers,
Steve    K7LXC



 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk