[TowerTalk] C3E Move Sucessful; Need one Measurement

[Bill Parry]

Howdy Mark,

I have the instruction manual in my hand and it says at the bottom of the
page:

15 M Rear Driver tips have two adjustments available: 1 up and 1 down (std
center freq is appx 21.225). Each hole in/out adjusts the center frequency
125 kHz.

10 Mtr Front Driver tips have 4 adjustments available: 2 up and 2 down (std
center freq 28.800) each hole in/out adjusts center frequency appx 250 kHz.

If you would like, I can scan the page with the measurements and send it to
you for your future reference.

Bill, W5VX

>-----Original Message-----
>From: towertalk-bounces at contesting.com [mailto:towertalk-
>bounces at contesting.com] On Behalf Of Mark Adams
>Sent: Thursday, March 29, 2007 8:11 PM
>To: towertalk at contesting.com
>Subject: [TowerTalk] C3E Move Sucessful; Need one Measurement
>
>Hi Gang,
>
>Thanks to all who provided me with instructions on moving a C3E from
>the home of a club SK to my place. In the end, I simply unbolted each
>element at the boom and slid them free. Then I placed the elements and
>boom on my extension ladder on the roof rack. It all got tied down and
>flagged. I took the backroads home. Some new hardware and its all ready
>to go up on my tower Saturday. I'm sure the DOT could have gotten me
>for over length, but they were all busy elsewhere!
>
>BUT, I have no instructions and an wondering if it is tuned for CW or
>SSB? Or maybe there is no difference on a Force 12 C3E. If someone can
>give me one measurement I can confirm what I've got.
>
>Thanks es 73,
>Mark K2QO
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk