[TowerTalk] C3E Move Sucessful; Need one Measurement

[Vic Sadesky]

Hey Mark
On the C3 the only adjustment is on the 10 Meter driven element.  If you 
look at the element tips you should see some extra holes.  If you see 
hole(s) its problem set for CW or about the first 500 Kc.  Shorten for 
something higher.  If you can get hold of a MFJ 259 you can get a pretty 
good picture of how it going to end up before its up.

73

Vic Sadesky KI6VC
Cal City
"Our doubts are traitors,
And make us lose the good
we oft might win
By fearing to attempt."
                  William Shakespeare
"Get'er Done"
                  The Cable Guy

----- Original Message ----- 
From: "Mark Adams" <msadams at acsu.buffalo.edu>
To: <towertalk at contesting.com>
Sent: Thursday, March 29, 2007 6:11 PM
Subject: [TowerTalk] C3E Move Sucessful; Need one Measurement


> Hi Gang,
>
> Thanks to all who provided me with instructions on moving a C3E from
> the home of a club SK to my place. In the end, I simply unbolted each
> element at the boom and slid them free. Then I placed the elements and
> boom on my extension ladder on the roof rack. It all got tied down and
> flagged. I took the backroads home. Some new hardware and its all ready
> to go up on my tower Saturday. I'm sure the DOT could have gotten me
> for over length, but they were all busy elsewhere!
>
> BUT, I have no instructions and an wondering if it is tuned for CW or
> SSB? Or maybe there is no difference on a Force 12 C3E. If someone can
> give me one measurement I can confirm what I've got.
>
> Thanks es 73,
> Mark K2QO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>