[TowerTalk] TRYLON TITAN 64 SELFSUPPORT
Mark Robinson
markrob at mindspring.com
Sun May 27 16:25:24 EDT 2007
Hi Scott,
I was just looking at your pictures. I was wondering if it is necessary to
have a form in the ground. Can you just use the sides of the hole as the
form? Also in your case did you remove the form after you had poured the
concrete and did you have any problems in removing the form?
thanks Mark N1UK G3ZZM
----- Original Message -----
From: "Scott Neader KA9FOX" <scott at ka9fox.qth.com>
To: "VE2RYY" <ve2ryy at globetrotter.net>
Cc: <towertalk at contesting.com>
Sent: Sunday, 27 May, 2007 4:20 PM
Subject: Re: [TowerTalk] TRYLON TITAN 64 SELFSUPPORT
> Maybe my pictures and story will help you...
>
> http://www.qth.com/ka9fox/tower/
>
> Specifically, check out "photo 12".
>
> Good luck with the project!
>
> 73 - Scott KA9FOX
>
> At 11:16 AM 5/27/2007, you wrote:
>>Hello
>>I want to instal the first section of a Trylon Titan 64 ft..
>>How do we put the first section with the level.
>>I did try to get infos on Trylon site, but found nothing about
>>putting the first section straight?
>>Thanks
>>NOEL
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list