[TowerTalk] LMR400-UF Crimp Connector ??

[Steve Maki]

My source for the RFC-1703-T has been RF Connection, and it's still on 
Joel's web site.

It sounds like an RFI part number, but may not be. I can verify though 
that it is sized correctly for LMR-400 & LMR-400UF, and is a quality 
connector.

Steve K8LX

DMartin560 at aol.com wrote:
>  
> What does that connector fit?
> A search on the RF Industries site can't find it?
> 
> Dwayne
>  
>  
> 
> RFC-1703-T
> 
> Steve K8LX
> 
> RICHARD SOLOMON wrote:
>> What is the proper UHF Crimp Connector for LMR400-UF ?
>> I have tried two, RFU507-ST and SI and find I have to remove
>> two strands of the center conductor before it fits.
>>  
>> Surely there must be a connector that fits ??
>>  
>> Thanks, Dick, W1KSZ/7