[TowerTalk] LMR400-UF Crimp Connector ??

[Shea Weston]

Dwayne,

I use the RF Industries RFU-507-SI connector on LMR-400UF all the time. Never
had a problem with the center conductor.

Shea
Offshore Outfitters

-----Original Message-----
From: towertalk-bounces at contesting.com [mailto:towertalk-bounces at contesting.com]
On Behalf Of DMartin560 at aol.com
Sent: Wednesday, November 28, 2007 2:12 PM
To: steve at oakcom.com; towertalk at contesting.com
Subject: Re: [TowerTalk] LMR400-UF Crimp Connector ??

 
What does that connector fit?
A search on the RF Industries site can't find it?

Dwayne
 
 

RFC-1703-T

Steve K8LX

RICHARD SOLOMON wrote:
> What is the proper UHF Crimp Connector for LMR400-UF ?
> I have tried two, RFU507-ST and SI and find I have to remove
> two strands of the center conductor before it fits.
>  
> Surely there must be a connector that fits ??
>  
> Thanks, Dick, W1KSZ/7





**************************************Check out AOL's list of 2007's hottest 
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk