[TowerTalk] hanging Heliax

[David Calder]

Hoisting grips at the top.

www.andrew.com/search/BN_237409.aspx

Snap in hangers going down the tower sure looks good and its easy to add
more
by stacking them.

http://www.andrew.com/products/trans_line/heliax/snapstak.aspx

But, the clamps and cable ties also work.

73 Dave
n4zkf
 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of richard allen
Sent: Tuesday, October 16, 2007 6:51 PM
To: towertalk at contesting.com
Subject: [TowerTalk] hanging Heliax

I am about to install two runs of 7/8 Heliax (LDF5) and three of 1/2 Heliax
(LDF4) going up a 55 foot tower. 

Can I use hose clamps to secure the cable?

Can I use lots of heavy plastic tie wraps (1/2" wide)?

Can I use the hose clamps around the connector for grounding at the top or
do I need to use the Andrews grounding kits?

Any suggestions would be appreciated.

Thanks,

Richard W5SXD
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk