[TowerTalk] re; remotely switching balanced lines

[Rick Karlquist]

You can increase the voltage handling capability of this
relay by modifying the mechanical travel limit when the contacts
are open.  This gets the contacts 1/2 inch apart so that
very high voltages can be blocked.  After doing this, the relay
might pull in slower but who cares?  You can also weaken the
spring if necessary.

Rick N6RK





JMLTINC at aol.com wrote:
> Look at part number  7384K13 at _http://www.mcmaster.com/_
> (http://www.mcmaster.com/)  for ideas.  Depending upon the load and
> insertion point (voltage /
> current), they will work  fine.
>
> -John, N9RF
>
>
>
> **************It's Tax Time! Get tips, forms and advice on AOL Money &
> Finance.      (http://money.aol.com/tax?NCID=aolcmp00300000002850)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>