[TowerTalk] Where to find-rent buck truck?

[Artmouton]

Check the local rental places.  I noticed a neighbor with a rental lift 
which he was using to trim trees. It had a chair section on the top with 
controls.  It was not suitable to get to my tower (68') but the 40' foot 
would probably be fine.  It was on a trailer so the transportation was not 
too bad.
Art K5FNQ

----- Original Message ----- 
From: "W4LDE-Ron" <w4lde at cfl.rr.com>
To: "TowerTalk" <towertalk at contesting.com>; "SteppIR Yahoo Group" 
<steppir at yahoogroups.com>
Sent: Tuesday, April 15, 2008 11:41 AM
Subject: [TowerTalk] Where to find-rent buck truck?


> Need some advice, had the local club scheduled to help get down my tower
> and tribander with the thought of donating it to the club.
> Rohn 25g 40ft, HamM-V rotor, CD-44 Rotor and a TA-32 plus a second TA-33
> thats performed very well with over 250 DX countries.
>
> Had a closing on this home yesterday and now I am a renter until the end
> of the month, then a new home SW of Atlanta
>
> Unfortunately the club has had to cancel due to illness of the climber,
> I would go up but the XYL doesn't want this vintage 65 year old up on
> the tower.
> Last time up was two years ago after the Hurricanes hit FL.  New guy
> wires and rotor positioning was needed.
>
> SO - I need to get a buck truck or lift of some kind and I don't know
> where to start.  Any ideas?  I am going to start with the local yellow
> pages and maybe AES which has a local store can give me some ideas.
>
> Any ideas where to start is appreciated.  Have a new SteppIR at the new
> QTH waiting for me.
>
> 73 de
> Ron W4LDE
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>